How to Fix Stinky Well Water

How to Fix Stinky Well Waterの手順についてポイントを解説します。分かりやすいガイドをご覧ください。

This is your first line of defense. You’re going to pour a calculated amount of household bleach (unscented, chlorine-based) directly into your well casing. Yes, bleach into your drinking water—temporarily. It sounds insane, but it nukes the sulfur-eating bacteria that cause the smell.

You’ll need to mix the bleach with water, pour it in, and then run every hose and faucet until you smell bleach. Let it sit for 12-24 hours. Then, flush the system until the bleach is gone. Warning: This can turn your white laundry gray if you don’t flush thoroughly.

If the stink comes back within a week, you know you’ve got a chronic bacteria problem. Shock chlorination is a temporary fix, not a permanent solution. Think of it as using hand sanitizer—great for immediate germs, but not a long-term health plan.

The Hot Water Heater Trick

Here’s a sneaky culprit: your hot water heater can be a bacteria spa. If the smell only comes from the hot tap, the heater is your problem. The tank provides warm, stagnant conditions for sulfur bacteria to party.

Try turning your water heater up to 140°F (60°C) for a few hours to “pasteurize” it. Then, flush the tank to clear out the dead bacteria. Don’t burn yourself! This is a quick, cheap fix that often works like a charm.

Smelly Water: Causes and Remedies - Pure Water Systems NV

If that doesn’t work, you might need to replace the anode rod inside the heater. It’s a magnesium rod that attracts corrosion, but it can also create the perfect environment for sulfur bacteria. Swap it for an aluminum or powered anode rod, and the smell often vanishes instantly.